●The heating barrel is made from the stainless steel to ensure that the material is not polluted and easier to be cleaned.

●The air dispersion device of the stainless steel net plate enables the heat air to evenly blow the material.

●The temperature is even in the barrel and the material sinters on time.

●There is a hinge connection structure between the heating barrel and the hopper, which facilitates opening, reloading and cleaning.

●An open-door type magnetic base, which is convenient and easy to take out the magnet for cleaning the scrap iron.

●The 24hours Timer startup device of any time can be matched to reduce pre-heating time on duty and improve efficiency.

●The hot air recycler device can be matched to reduce energy consumption.

●The Hopper dust collector can be matched to prevent the dust into the workshop.

●The hopper is made from high quality of stainless steel to ensure that the materials won't be polluted.

●The out layer is made of special material which is fashionable and attractive.

●The high-efficiency insulation material between internal layer and out layer to reduce the heat loss.

●Hot air down-blowing design ensures the even temperature in the hopper.

●The temperature is controlled by the import PID temp. controller to ensure the precision temperature.

●The 24H timer can achieve device startup in advance to improve work efficiency.

●Equipping with the cleaning door, which is convenient for cleaning the hopper.

●The hopper is made from high quality of stainless steel to ensure that the materials won't be polluted.

●The out layer is made of special material which is fashionable and attractive.

●The high-efficiency insulation material between internal layer and out layer to reduce the heat loss.

●Hot air down-blowing design ensures the even temperature in the hopper.

●The temperature is controlled by the import PID temp. controller to ensure the precision temperature.

●The 24H timer can achieve device startup in advance to improve work efficiency.

●Equipping with the cleaning door, which is convenient for cleaning the hopper.

●Combine the three functions of Drying, Dehumidifying and Conveying into one.Also can make the equipment convey the materials onto three hoppers according to customer's requirements.

●The dehumidification system is desingned to be closely hermetic, which ensures the air of low dew point doesn't contact with the outside air.

●The conveying system is designed to be closely hermetic, which ensuresthe dried material not contacting with the outside air and being wet again.

●The shut off valve is equipped on the conveying system to ensure no remnant materials in the material pipeline and smooth conveying.

●Double-layer heat preservation dry barrel to effective prevent the heat loss and save energy consumption.

●High efficient heat dissipater to ensure the air with lower temperature and lower dew point.

●The machine can provide the dry wind with the low dew point of -50℃ and satisfy many requsets of plastic production.

●The machine is controlled by PID micro computer to make the accurate temperature.

●The machine is equipped with the converse alarm function.

●The machine is equipped with the alarm function for abnormal wheel turning.

●The machine is equipped with highly efficient condenser to ensure the lower temperature of the return air.

●The device operational principle: the air passes rotating honeycomb then blows off the dew on the mold to keep the mold clean.

●Our Mold Dehumidifying Dryer adopt imported rotating honeycomb, can provide the steady dew piont around -10℃, make the injection mold far away from condensation of moisture, improve the products' quality effectively.

●Imported high speed commutator motor, small cubage and strong suction.

●Connection between operation controller and electric control box free and convenient operation.

●Controlled by microcomputer, action precision.

●Out hanged air storage device to thoroughly clean the dust on the strainer.

●Electronic action detector and low fault rate. 

●Multi fault indicator lamp to facilitate the customer knowing the reason and handling in time.

●Separation design between the controller and the material hopper, which is convenient and simple to operate.

●Controlled by microcomputer, action precision and alarm attentions.

●Motor overload protection equipped to effectively prolong the service life of the motor.

●With the high voltage blower, the materials can be conveyed in a long distance.

●The hopper is made from the stainless steel to ensure that the material can not be polluted.

●The machine type one-to-several plastic Injecting molding machine can be selected for charging as per customer's needs.

●The electric eye hopper or vacuum hopper can be selected according to customer's needs.

●Combine the two functions of Material storage and Conveying, which can prevent the raw material from being polluted and material quick-changing is available.

●The overall-movement is convenient, neat and smart;

● Color powder is acceptable for conveying;

● Floor-standing drying meets factory safety standards;

●Combine the two functions of Material storage and Conveying, which can prevent the raw material from being polluted and material quick-changing is available.

●The overall-movement is convenient, neat and smart;

● Color powder is acceptable for conveying;

● Floor-standing drying meets factory safety standards;

Central conveying system enables central processing and closed conveyance of raw materials. Eliminates noise, dust and hot air pollution. It is a system to  productivity and to realize distant centralized control for one to more sites and increase production efficiency.

·Safe production environment & centralized dust removal;

·Lower noise;

·Decreases energy consumption;

·Decreases production cost;

·Promotes company image.

●Belt conveyor equips with elastic adjusted device to ensure the reliable running.

●The length of Belt conveyor can be customized according to the customer's requirement.

●The height of Belt conveyor can be adjusted within limits.

●Belt conveyor equips with baffle plate for blocking the products & materials to avoid being down.